[PATCH 2/6] mfd: spacemit: add support for SpacemiT PMICs

[Alex Elder]

On 6/19/25 9:41 AM, Lee Jones wrote:
> On Thu, 19 Jun 2025, Lee Jones wrote:
> 
>> On Fri, 13 Jun 2025, Alex Elder wrote:
>>
>>> Add support for SpacemiT PMICs. Initially only the P1 PMIC is supported
>>> but the driver is structured to allow support for others to be added.
>>>
>>> The P1 PMIC is controlled by I2C, and is normally implemented with the
>>> SpacemiT K1 SoC.  This PMIC provides six buck converters and 12 LDO
>>
>> six or 12.  Please pick a format and remain consistent.
>>
>>> regulators.  It also implements a switch, watchdog timer, real-time clock,
>>> and more, but initially we will only support its regulators.
>>
>> You have to provide support for more than one device for this to be
>> accepted into MFD.
>>
>>> Signed-off-by: Alex Elder <elder at riscstar.com>
>>> ---
>>>   drivers/mfd/Kconfig         | 11 +++++
>>>   drivers/mfd/Makefile        |  1 +
>>>   drivers/mfd/spacemit-pmic.c | 91 +++++++++++++++++++++++++++++++++++++
>>>   3 files changed, 103 insertions(+)
>>>   create mode 100644 drivers/mfd/spacemit-pmic.c
> 
> Right now, it looks like all you need is:
> 
> drivers/mfd/simple-mfd-i2c.c

Now *that* is a good suggestion.  I'll look at that now and will use
that if I can.

Thanks.

					-Alex