[wireless-regdb] [PATCH] wireless-regdb: Update regulatory rules for Croatia (HR)

[Andrej Vlašić]

On 15 October 2015 at 20:04, Seth Forshee <seth.forshee at canonical.com> wrote:
> On Tue, Oct 13, 2015 at 08:31:24PM +0200, Andrej Vlasic wrote:
>> Update frequency allocation rules to mach data from table [1].
>>
>> Also increase allowed power limit for range 5150-5250 Mhz to 200mW.
>>
>> [1] http://tablice.hakom.hr:8280/vis?lang=en
>>
>> Signed-off-by: Andrej Vlasic <andrej.vlasic0 at gmail.com>
>> ---
>>  db.txt | 14 ++++++++++----
>>  1 file changed, 10 insertions(+), 4 deletions(-)
>>
>> diff --git a/db.txt b/db.txt
>> index d57ea84..3b36616 100644
>> --- a/db.txt
>> +++ b/db.txt
>> @@ -504,11 +504,17 @@ country HN: DFS-FCC
>>       (5490 - 5730 @ 160), (24), DFS
>>       (5735 - 5835 @ 80), (30)
>>
>> +# Data from table of frequency allocations: http://tablice.hakom.hr:8280/vis?lang=en
>> +# For 5ghz range see http://www.hakom.hr/UserDocsImages/op%C4%87e%20dozvole%20prosinac%202009.g/Opca_dozvola_85.pdf
>> +# and http://www.hakom.hr/UserDocsImages/op%C4%87e%20dozvole%20prosinac%202009.g/Opca_dozvola_86.pdf
>> +# and http://www.hakom.hr/UserDocsImages/op%C4%87e%20dozvole%20prosinac%202009.g/Opca_dozvola_87.pdf
>> +# TPC devices on range 5250-5350 can use 200mW, and 1W on range 5470-5725.
>> +
>>  country HR: DFS-ETSI
>> -     (2402 - 2482 @ 40), (20)
>> -     (5170 - 5250 @ 80), (20), AUTO-BW
>> -     (5250 - 5330 @ 80), (20), DFS, AUTO-BW
>> -     (5490 - 5710 @ 160), (27), DFS
>> +     (2400 - 2483.5 @ 40), (100 mW)
>> +     (5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
>> +     (5250 - 5350 @ 80), (100 mW), NO-OUTDOOR, DFS, AUTO-BW
>> +     (5470 - 5725 @ 160), (500 mW), DFS
>>       # 60 gHz band channels 1-4, ref: Etsi En 302 567
>>       (57000 - 66000 @ 2160), (40)
>
> In general the changes look okay to me and in line with the published
> regulations (I couldn't read some of the documents you linked to, but
> the limits do look to be in line with ERC/DEC/(01)07 and ECC/DEC/(04)08
> which are referenced by the frequency allocation table).
>
> It seems pretty arbitrary to change from dBm to mW however, especially
> for those rules whose power limit isn't actually changing. I'd prefer we
> leave them in dBm for consistency, in which case I think we end up with:
>
> country HR: DFS-ETSI
>         (2400 - 2483.5 @ 40), (20)
>         (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
>         (5250 - 5350 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
>         (5470 - 5725 @ 160), (27), DFS
>         # 60 gHz band channels 1-4, ref: Etsi En 302 567
>         (57000 - 66000 @ 2160), (40)
>
> If that looks fine to you then I can fix it up when I apply the patch.

It's fine with me too like that.

>
> Thanks,
> Seth